| DC Battery Parameters | Model | ZCI10050HY (Hybrid Inverter) |
| Rated Battery Capacity | 100kWh |
| Rated Battery Voltage | 358.4V |
| Battery Operating Voltage Range | 324.8V ~ 397.6V |
| Battery Cell Type | LFP Lithium Iron Phosphate |
| Cell Capacity | 280Ah / 314Ah |
| Cycle Life | ≥6,000 cycles (0.5C, 5%-95% DOD; 0.8C, 80% DOD) |
| Standard Charge & Discharge Rate | 0.5C |
| Battery Pack Series & Parallel Config | 1P112S |
| Module Cooling Type | Forced Air Cooling |
| PCS AC Conversion Parameters | Rated AC Output Power | 50kW |
| Maximum Output Power | 55kW |
| Max Output Current | 200A |
| Rated AC Voltage | 400V |
| AC Voltage Fluctuation Range | ±15% |
| Rated AC Frequency | 50Hz / 60Hz |
| Wiring Standard | 3P+N+PE |
| Current Total Harmonic Distortion THDI | Below3PercentUnderRatedPower |
| Power Factor Range | 0.99 lag ~ 0.99 lead |
| Voltage Total Harmonic Distortion THDU | Below3PercentLinearLoad |
| PCS Cooling Method | Forced Air Cooling |
| Peak Conversion Efficiency | 98.50% |
| PV Input Parameters | Recommended Max PV Array Capacity | 100kW |
| PV Maximum Open Circuit Voltage | 1000V |
| PV Rated Operating Voltage | 600V |
| MPPT Tracking Voltage Window | 150V ~ 850V |
| General System Specifications | Round-trip Energy Efficiency | ≥90% |
| Enclosure Protection Grade | IP54 |
| Corrosion Resistance Grade | C3 standard, C4/C5 optional |
| Fire Suppression Solution | Aerosol / Perfluorohexanone (optional) |
| Isolation Mode | Non-isolated; isolated transformer optional |
| Working Relative Humidity | 0% ~ 95%, non-condensing |
| Operating Ambient Temperature | -30℃ to 55℃, power limit activated over 45℃ |
| Maximum Applicable Altitude | ≤3000m, power derating above 2000m |
| BMS Communication Interface | CAN |
| EMS Communication Interface | 4G / CAN / RS485 |
| Overall Dimension (W × D × H) | 540 × 1200 × 2300 mm |
| Total Net Weight | 2.6 Ton |
| Annual Capacity Decay Rate | Below3PercentPerYear |
| Official Warranty Period | 5years |
| Supplementary Note | Cabinet Integration | All-in-one design integrates battery, BMS, PCS, DC-DC and STS; supports grid-connected & off-grid microgrid operation |